Siemens 6SY7010-0AB40 Full Technical Specifications
1. Basic Product Info
| Item | Parameter Value |
|---|---|
| Full Model | 6SY7010-0AB40 |
| Sub-part No. | C98130-A1235-B270-03-07 (silicon stack assembly code) |
| Manufacturer | Siemens (Eupec original semiconductor core) |
| Product Type | Assembled Thyristor (SCR) Power Block with heat sink & trigger wiring, for 6SE70 series master drives |
| Origin | Germany |
| Tariff HS Code | 85049099 |
| Status | Obsolete / Discontinued OEM spare part, only stock & refurbished available |
2. Electrical Ratings
| Electrical Parameter | Rating |
|---|---|
| Device Configuration | Anti-parallel dual thyristor (2 SCRs per block, phase leg unit) |
| Repetitive Peak Reverse Voltage (VRRM) | 1200 V |
| RMS Continuous Current per Leg (IT(RMS)) | 400 A |
| Average On-State Current (IT(AV)) | 250 A |
| Gate Trigger Voltage (VGT) | 2.5–4 V DC |
| Gate Trigger Current (IGT) | 40–80 mA |
| On-State Voltage Drop (VTM) | ≤ 1.6 V @ rated current |
| dV/dt Critical Rate | ≥ 500 V/μs |
| dv/dt Withstand (Off-state) | 1000 V/μs max |
| Internal Circuitry | Built-in RC snubber absorption circuit for high-harmonic industrial environments (AB40 suffix feature) |
3. Mechanical & Cooling Data
| Mechanical Item | Spec |
|---|---|
| Cooling Method | Forced air convection (aluminum extrusion heat sink integrated) |
| Overall Net Weight | 4.86 kg (complete assembly: copper busbars, heat sink, SCR stack, trigger PCB) |
| Mounting Interface | Thick copper laminated busbar terminals (M10 high-torque bolt holes for power connection) |
| Trigger Terminal | 6-pin plug-in gate socket (marked G1/K1 as seen on unit label) |
| Insulation Class | Class H, isolation ≥ 500 MΩ @ 500 V DC between power & trigger circuits |
4. Environmental & Thermal Limits
| Thermal/Environment | Range |
|---|---|
| Operating Junction Temp (Tj) | -40 °C to +125 °C |
| Storage Temperature | -40 °C to +70 °C |
| Ambient Operating Temp (Ta) | -20 °C to +60 °C (derate current above 40°C) |
| Protection Class | IP20 (indoor cabinet installation only) |
| Compliance | RoHS 2 compliant, CE certified for industrial drive systems |
5. Compatibility & Application
- Matched Drive Models: 6SE7041-3FK85-1JA0, 6SE7041-8FK85-1JA0, 6SE7041-8HK85-1JA0 (SIMOVERT MASTERDRIVES VC high-power inverters)
- Typical Use Cases: Heavy industry – rolling mills, port cranes, large extruders, mine hoists, high-power conveyor drives
- Key Feature of -0AB40 variant: Enhanced anti-interference snubber design for unstable grid voltage sites (vs base AB07 standard version)
6. Label Markings Cross Reference
- Serial batch code: 11229 0038-75361-15/12/05 (production trace code)
- Aux PCB codes: C98043-A1687-L1-05 (trigger control board), C98040-A1687-P1 (wiring harness board)
