Siemens 6DR5310-0NG11-0AA1 SIPART PS2 Electropneumatic Positioner
Official Product Description (Siemens Standard Datasheet Tone)
The 6DR5310-0NG11-0AA1 belongs to the SIPART PS2 series, Siemens’ modular smart electropneumatic positioner engineered for precise stroke control of single-acting pneumatic linear and part-turn actuators. It adopts lightweight polycarbonate housing without explosion protection, supporting 2/3/4-wire 4–20 mA analog control signal with built-in HART communication. This unit is pre-equipped with two functional modules: Digital I/O Module (DIO) and Analog Output Module (AOM). The DIO provides 1 digital input and 3 digital outputs for upper/lower limit feedback and collective fault indication; the AOM delivers isolated 4–20 mA analog valve position feedback signal to DCS/PLC systems. It features fail-safe design: the actuator will automatically exhaust pressure once auxiliary power fails. Standard connection ports are M20×1.5 for electrical wiring and G 1/4 for pneumatic air supply, with multi-language brief operation manuals included as factory standard. It delivers ultra-low steady-state air consumption, integrated valve/actuator diagnostic functions, and adaptive PID control algorithm, widely deployed in chemical, power, water treatment, pulp & paper and general process industries.
Technical Specification Table
| Specification Item | Official Technical Data of 6DR5310-0NG11-0AA1 |
|---|---|
| Product Series | SIPART PS2 Smart Electropneumatic Positioner |
| Article No. | 6DR5310-0NG11-0AA1 |
| Actuator Compatibility | Single-acting pneumatic linear / part-turn actuators |
| Enclosure Material | Polycarbonate, non-explosion-proof version |
| Control Input Signal | 4 … 20 mA DC, 2/3/4-wire system, HART 7 communication built-in |
| Integrated Modules (Factory Pre-installed) | 1. Digital I/O Module (DIO): 1 DI, 3 DO (2 limit signals + 1 fault collective alarm)
2. Analog Output Module (AOM): Isolated 4–20 mA valve position feedback output |
| Fail-Safe Logic | Depressurize single-acting actuator automatically when auxiliary power lost |
| Electrical Connection Thread | M20 × 1.5 cable gland port |
| Pneumatic Connection Thread | G 1/4 inch female port |
| Standard Air Supply Pressure | 1.4 … 7 bar (20 … 102 psi); Recommended operating pressure: 2–6 bar |
| Air Quality Requirement | ISO 8573-1 Class 3 (max particle size 5 μm, residual oil ≤ 1 mg/m³) |
| Steady-State Air Consumption | ≤ 0.01 Nm³/h (0.006 SCFM) |
| Max Exhaust Air Flow (6 bar supply) | 9.8 Nm³/h (43.3 US gpm) |
| Linear Stroke Range | 3 … 130 mm (custom longer stroke available on request) |
| Part-Turn Rotation Angle | 30° … 100° |
| Position Control Accuracy | ±0.1 % FS |
| Repeatability | ±0.05 % FS |
| Ambient Operating Temperature | -30 °C … +80 °C |
| Relative Humidity | 0 … 100 %, non-condensing |
| Protection Class | IP66 per IEC/EN 60529, NEMA 4X |
| Vibration Resistance | Sine wave: 3.5 mm @ 2–27 Hz; 98.1 m/s² @ 27–300 Hz, 3 cycles per axis |
| Altitude Limit | Max 2000 m above sea level (derate power supply above 2000 m) |
| Diagnostic Functions | Valve friction monitoring, air leakage detection, travel deviation alarm, NE 107 compliant predictive maintenance diagnostics |
| Mounting Standard | NAMUR / IEC 60534-6-1 for linear actuators; VDI/VDE 3845 for part-turn actuators |
| Accessory Option | Aluminum pressure gauge block (G 1/4), M12 device plug (order with suffix -Z D53) |
| Documentation Included | Multilingual operation brief (German / English / Chinese) |
| Product Lifecycle Status | PM300 Active Series (mass production available) |
| Compliance Certifications | CE, RoHS, UL, CSA |
Key Model Code Decoding (Siemens Official Naming Rule)
- 6DR5310: Base model of polycarbonate non-explosion PS2 single-acting positioner
- 0NG11:
- N = Polycarbonate housing, non-ex-proof
- G = Single-acting actuator support
- 1 = Equipped with Digital I/O DIO module
- 1 = Equipped with Analog Feedback AOM module
- 0AA1: Standard version with fail-safe depressurization logic, multi-language manuals, no pressure gauge block pre-mounted
