Siemens CU310DP single-axis control unit 6SL3040-0LA00-0AA1 Sinamics S120 single-axis drive control unit with Profi bus-DP interface
Siemens CU310DP Siemens S120 single axis control unit CU310DP
Product order number: 6SL3040-0LA00-0AA1
Siemens CU310DP Siemens S120 single axis control unit CU310DP
description:
Siemens CU310DP single-axis control unit 6SL3040-0LA00-0AA1 Sinamics S120 single-axis drive control unit with Profi bus-DP interface
product description
SINAMICS S120 CONTROL UNIT CU310 DP WITH PROFIBUS INTERFACE WITHOUT COMPACTFLASH CARD
, CU310DP is the drive is connected to the upper controller through Profibus-DP
General technical parameters
Incoming line voltage
(Under 2000m above sea level)
1 phase. 200 V-240 V AC ±10% (-15% <1 minute)
3-phase. 380 V-480 V AC ±10% (-15% <1 minute)
The DC bus pre-charging frequency is as large as 1x30s
Grid frequency 47 Hz-63 Hz DC bus voltage about 1.35 x incoming line voltage
Power factor (fundamental wave) >0.96 Control power supply 24 V DC, -15/+20%
Installation altitude Normal altitude ≤1000m. Derate the output when the altitude is 1000m-4000m. Cooling type Integrated internal fan
The ambient temperature is normally 0-40°C. When the temperature is between 40°C and 55°C, derating is required.
Output frequency range 1) Servo control mode: 0 Hz-650 Hz. 2) Vector control mode: 0 Hz-300 Hz. 3) V/F control mode: 0 Hz-300 Hz.
Radio interference suppressor 1) Standard: No. 2) When there is an incoming line filter: Comply with EN55011 Class A1 to and EN61800-3 Class C2.