| I. Core Product Information |
Product Range |
Altivar Process ATV900 |
|
Product Type |
Industrial variable speed drive |
|
Applicable Motors |
Asynchronous motors, synchronous motors |
|
Typical Application |
Industrial process control scenarios |
|
Product Version |
Standard version, with integrated braking chopper |
|
Supply Phases |
3-phase |
|
Mounting Method |
Wall mount |
|
Protection Rating |
IP21, UL Type 1 |
| II. Electrical Core Parameters |
Rated Input Voltage |
380…480 V -15…+10 % |
|
Input Network Frequency |
50…60 Hz |
|
Prospective Short-Circuit Current |
50 kA |
|
Rated Output Current |
211 A (normal duty, 4 kHz); 173 A (heavy duty, 4 kHz) |
|
Matched Motor Power |
110.0 kW (normal duty); 90.0 kW (heavy duty) |
|
Rated Apparent Power |
121.8 kVA (normal duty); 102.6 kVA (heavy duty) |
|
Maximum Output Voltage |
480.0 V |
|
Maximum Output Frequency |
599 Hz |
|
Switching Frequency |
1…8 kHz adjustable; 2.5…8 kHz with derating, nominal value 2.5 kHz |
|
Input Line Current |
380V: 201.0A (normal) / 170.0A (heavy); 480V: 165.0A (normal) / 143.0A (heavy) |
|
Peak Transient Current |
253A for 60s (normal duty); 259.5A for 60s (heavy duty) |
|
Total Harmonic Distortion (THDI) |
<48% at full load, compliant with IEC 61000-3-12 |
| III. Control & Performance |
Motor Control Modes |
Asynchronous motors: Constant torque, variable torque, optimized torque mode; Synchronous motors: Permanent magnet, synchronous reluctance motors |
|
Acceleration/Deceleration Ramps |
Linear/S/U/custom curve, independently adjustable from 0.01…9999s |
|
Slip Compensation |
Adjustable, auto-adaptive to load, suppressible (unavailable for permanent magnet motor mode) |
|
Stop Method |
DC injection braking, integrated brake chopper |
|
4-Quadrant Operation |
Supported |
|
Built-in Regulator |
Adjustable PID regulator |
| IV. Interfaces & Expansion |
Digital Inputs |
10 channels |
|
Relay Outputs |
R1: Fault relay, NO/NC, 100,000 cycles lifespan; R2/R3: Sequence relay, NO, 1,000,000 cycles lifespan |
|
Communication Interfaces |
Ethernet, 2-wire RS485, 2 RJ45 ports |
|
Supported Protocols |
Ethernet IP/Modbus TCP, Modbus RTU |
|
Communication Baud Rate |
Ethernet: 10/100 Mbit/s; Modbus serial: 4.8/9.6/19.2/38.4 kbit/s |
|
Serial Communication Parameters |
Address range 1…247, 8-bit data, configurable odd/even/no parity, no impedance polarization |
|
Expansion Slots |
Slot A: Multiple communication modules; Slot A/B/C: I/O expansion, relay expansion modules; Slot B: Encoder interface modules |
|
Local Status Indicators |
Multi-color LED diagnostic lamps |
|
Isolation Design |
Electrical isolation between power terminals and control terminals |
| V. Safety & Protection |
Supported Safety Functions |
STO, SLS, SBC, SS1 |
|
Disabled Safety Functions |
SOS, SP, SSM, SS2, SDI, SLP |
|
Comprehensive Protection Functions |
Motor thermal protection, drive thermal protection, STO, motor phase loss, overvoltage/undervoltage, short-circuit, earth fault, overspeed, control circuit break |
| VI. Physical Specifications |
Dimensions |
W 320 mm × H 1205 mm × D 393 mm |
|
Net Weight |
104 kg |
|
Wiring Terminals |
Main circuit: 50…120 mm² screw terminals; DC circuit/control circuit: 0.5…1.5 mm² screw terminals |
| VII. Environment & Certification |
Installation Posture |
Vertical ±10° |
|
Operating Ambient Temperature |
-15…50 °C (no derating); 50…60 °C (derating required) |
|
Storage/Transport Temperature |
-25…70 °C |
|
Relative Humidity |
5…95 % non-condensing |
|
Mechanical Resistance |
Shock: 150 m/s² for 11 ms; Vibration: 1.5 mm (2…13 Hz), 1 g (13…200 Hz) |
|
Pollution Degree |
2 |
|
Overvoltage Category |
III |
|
Insulation Resistance |
>1 MΩ @ 500V DC for 1 minute (to earth) |
|
Noise Level |
69.9 dB |
|
Certifications & Compliance |
UL, CSA, TÜV, CE; compliant with UL 508C, IEC 61800 series, IEC 61000-3-12, IEC 60721-3, IEC 61508, ISO 13849-1 standards |
| VIII. Packaging & Logistics |
Packaging Quantity per Unit |
1 unit |
|
Package Dimensions |
L 141 cm × W 50 cm × H 71 cm |
|
Gross Package Weight |
128 kg |
|
Country of Origin |
CN |
