Technical Specifications for 20F1ANC302JN0NNNNN
| Item | Core Specification Value |
|---|---|
| Manufacturer | Rockwell Automation |
| Brand | Allen‑Bradley |
| Catalog / Part Number | 20F1ANC302JN0NNNNN |
| Product Series | PowerFlex 753 Air‑Cooled AC Drive |
| Frame Size | Frame 7 (Compatible with Frame 6~8 mounting) |
| Enclosure Rating | IP20/IP00, NEMA/UL Type Open (for control cabinet installation only) |
| Rated Input Voltage | 3‑Phase 380–480V AC (Nominal 400V AC) |
| Rated DC Bus Voltage | 540V DC |
| Continuous Output Current | 265A (Heavy Duty) / 302A (Normal Duty) |
| Matched Motor Power | 200kW/250Hp (Heavy Duty) / 250kW/300Hp (Normal Duty) |
| Frequency Range | 50/60Hz Input; 0~500Hz Output |
| Adjustable Carrier Frequency | 2kHz ~ 16kHz |
| Built‑in EMC Filter | Yes (C3 Industrial Class, CM cap jumper pre‑installed) |
| Braking Configuration | No built‑in braking resistor/transistor (external unit required) |
| Overall Dimensions (H×W×D) | 1080mm × 430mm × 350mm |
| Net Weight | 118kg |
| Cooling Method | Forced Air Cooling (Bottom intake, top exhaust) |
| Full Load Operating Temperature | 0°C ~ +40°C (derate 1%/°C above 40°C) |
| Altitude Full Load Limit | ≤1000m (derate 0.5%/100m above 1000m) |
| Standard Control Modes | V/F Scalar Control, Sensorless Vector Control (ASCL) |
| Built‑in I/O | 6DI, 3 Relay DO, 2AI, 2AO |
| Core Protection Functions | Overcurrent/overvoltage/undervoltage, phase loss, short circuit, ground fault, IGBT/motor overheat, stall prevention, current limiting |
| Onboard Standard Interface | RS485 Modbus RTU |
| Key Certifications | UL, cUL, CE, RoHS, ABS Marine |
| Product Lifecycle Status | Discontinued (Jun 30, 2024); Replacement: PowerFlex 755T |
About 20F1ANC302JN0NNNNN
The 20F1ANC302JN0NNNNN drive is a microprocessor-enabled variable frequency drive that has been designed and manufactured by Allen-Bradley. The drive has a robust design that offers high performance for a variety of industrial applications. It can provide general-purpose control for applications rated at up to 250 Kilowatts. This PowerFlex 753 series AC drive runs with a 400 Volts AC or 540 Volts DC source. It is a 3-phase drive and it draws power from a 3-phase electrical source. The current rating of the drive is 265 Amps. With active filtering available, the drive has a jumper installed for the CM cap connection. The 20F1ANC302JN0NNNNN drive meets all the hardware requirements of the EMC guidelines and it is also certified with a CE rating. No internal resistor or the internal transistor is present in this drive variant. The drive comes with an IGBT braking system for speed control. The drive is manufactured with a built-in precharge. This drive variant has no human-machine interface module mounted in it. The front panel of the drive has a company label along with some LED indicators. The top part of the drive is used for airflow.
The 20F1ANC302JN0NNNNN drive supports a wide range of network protocols which help it to integrate with different manufacturing architecture systems. The drive is equipped with the DeviceLogix software which aids in the control of output and manages the status information within the drive. The 20F1ANC302JN0NNNNN drive is known for its closed-loop vector control. It uses PID control for regulating and controlling the torque and speed of 3-phase induction motors. The drive has an operating temperature range between 0 and 50 degrees Celsius. The drive should not be exposed to extreme heat, dust, dirt, or corrosive gases or vapors. The drive has a conformal coating and is manufactured in a compact size.
