B+R 4PP120.0571-01 Panels
B+R 4PP120.0571-01 Power Panel 400 Panels
| B&R 4PP120.0571-01 Power Panel 400 Technical Specifications | |
| Parameter Category | Technical Details |
| 1. Basic Information | |
| Brand | B&R (Bernecker + Rainer) |
| Model Number | 4PP120.0571-01 |
| Product Series | Power Panel 400 |
| Product Type | Industrial HMI Touch Panel |
| Software Compatibility | B&R 2000 PLC Family, Automation Runtime |
| Intended Application | Industrial automation, machine control, process monitoring, operator interface |
| 2. Display & Input Specifications | |
| Display Type | 5.7″ QVGA Monochrome LC Display |
| Resolution | 320 x 240 pixels (QVGA) |
| Input Technology | Analog Resistive Touch Screen (Gunze) |
| Touch Controller | Serial Hampshire Controller |
| Display Brightness | 140 cd/m² |
| Half-Brightness Lifetime | 20,000 hours |
| Viewing Angle | Horizontal: ±60°, Vertical: +40°/-50° |
| Mounting Orientation | Horizontal and Vertical mounting supported |
| Front Protection | Multi-coated, non-reflective filter glass |
| 3. System & Storage Specifications | |
| Processor | Geode LX800 500 MHz, 32-bit x86 with MMX/3DNow technology |
| Processor Cache | 128 kB L1 Cache (64 kB I-Cache / 64 kB D-Cache), 128 kB L2 Cache |
| System Memory (SDRAM) | 64 MB DDR SDRAM |
| Firmware Storage | 2 MB On-board Flash Memory |
| Battery-Buffered SRAM | 512 KB SRAM with battery backup for power failure mode |
| Removable Storage | 1 x Type I CompactFlash Card Slot |
| Real-Time Clock (RTC) | Battery-buffered RTC, ±30 ppm accuracy at +25°C |
| Backup Battery | Renata 950 mAh removable battery, 3-year typical service life |
| Battery Change Buffer | 10-minute backup capacitor for battery replacement |
| 4. Communication Interface Specifications | |
| Ethernet Interface | 1 x 10/100 MBit/s Ethernet (NE2000-compatible), BaseT/100 BaseT S/STP |
| Serial Interface | 1 x RS232 COM Port, modem-capable, 16C550 UART compatible, up to 115 kBaud, 9-pin DSUB plug |
| USB Interfaces | 2 x USB 1.1 Host Ports, Type A connector |
| Expansion Slots | Max. 2 x aPCI Slots (for optional interface modules) |
| Mode/Node Switches | 2 x 16-digit operating mode switches |
| Status LEDs | 1 x User LED (green), 1 x CompactFlash Access LED (yellow) |
| 5. Electrical Specifications | |
| Nominal Supply Voltage | 24 VDC ±25% |
| Supply Isolation | Not electrically isolated |
| Power Consumption | Typical 20 W |
| Cooling Method | Passive heat sink, fan-free operation |
| Watchdog Controller | Integrated MTCX watchdog controller |
| Power Failure Logic | Integrated power failure controller with 10 ms buffer time |
| Reset Button | Externally accessible reset button |
| Power Button | Externally accessible power button |
| 6. Mechanical & Environmental Specifications | |
| Housing Material | Metal housing with anodized aluminum front frame |
| Front Panel Protection Rating | IP65 (dust-tight, water jet protected) |
| Operating Temperature Range | -20°C to +55°C |
| Storage Temperature Range | -20°C to +70°C |
| Relative Humidity | 5% to 95% non-condensing |
| Vibration Resistance | Compliant with industrial automation standards |
| Shock Resistance | Compliant with industrial automation standards |
| ESD Protection | Compliant with IEC 61000-4-2 standard |
| 7. Certifications & Compliance | |
| CE Certification | Compliant with CE Low Voltage Directive (LVD) |
| EMC Compliance | Compliant with IEC 61000 series EMC standards |
| RoHS Compliance | Compliant with EU RoHS directive for hazardous substances |
| UL Certification | UL listed for industrial control equipment |
| cUL Certification | cUL listed for Canadian market |
| 8. Core Functional Features | |
| Operating System | B&R Automation Runtime real-time operating system |
| Diagnostics Capability | Integrated system diagnostics, runtime monitoring, error logging |
| Firmware Upgrade | Support for local and remote firmware/BIOS upgrade |
| Parameter Configuration | Support for display-specific parameter adjustment, key configuration |
| Calibration Function | Support for touch screen calibration, control device calibration |
| Data Logging | Support for operating hours logging, system status logging |
| Backup & Restore | Support for BIOS/firmware backup and restore |
| Multi-language Support | Support for multiple languages in user interface |
