| Main |
| Range of product |
Easy Altivar 610 |
| Product specific application |
Fan, pump, compressor, conveyor |
| Product or component type |
Variable speed drive |
| Device short name |
ATV610 |
| Variant |
Standard version |
| Product destination |
Asynchronous motors |
| Synchronous motors |
| Mounting mode |
Cabinet mount |
| EMC filter |
Integrated conforming to IEC 61800-3 category C3 with 50 m |
| IP degree of protection |
IP20 |
| Type of cooling |
Forced convection |
| Supply frequency |
50…60 Hz +/-5 % |
| Network number of phases |
3 phases |
| [Us] rated supply voltage |
380…460 V – 15…10 % |
| Motor power kW |
55 kW for normal duty |
| 45 kW for heavy duty |
| Motor power hp |
75 hp for normal duty |
| 60 hp for heavy duty |
| Line current |
111.5 A at 380 V (normal duty) |
| 99.7 A at 460 V (normal duty) |
| 95.9 A at 380 V (heavy duty) |
| 84.0 A at 460 V (heavy duty) |
| Prospective line Isc |
22 kA |
| Apparent power |
79.5 kVA at 460 V (normal duty) |
| 66.9 kVA at 460 V (heavy duty) |
| Continuous output current |
88 A at 2.5 kHz for heavy duty |
| 120 A at 2.5 kHz for normal duty |
| Maximum transient current |
132 A during 60 s (heavy duty) |
| 132 A during 60 s (normal duty) |
| Asynchronous motor control profile |
Optimized torque mode |
| Constant torque standard |
| Variable torque standard |
| Output frequency |
0.1…500 Hz |
| Nominal switching frequency |
2.5 kHz |
| Switching frequency |
1…8 kHz adjustable |
| number of preset speeds |
16 preset speeds |
| Communication port protocol |
Modbus serial |
| Option card |
Slot A: communication card, Profibus DP V1 |
| Slot A: digital or analog I/O extension card |
| Slot A: relay output card |
| Complementary |
| Output voltage |
<= power supply voltage |
| Motor slip compensation |
Automatic whatever the load |
| Adjustable |
| Not available in permanent magnet motor law |
| Can be suppressed |
| Acceleration and deceleration ramps |
S, U or customized |
| Linear adjustable separately from 0.01 to 9000 s |
| Braking to standstill |
By DC injection |
| Frequency resolution |
Display unit: 0.1 Hz |
| Analog input: 0.012/50 Hz |
| Electrical connection |
Control, screw terminal: 0.5…1.5 mm² |
| Line side, screw terminal: 70…120 mm² |
| Motor, screw terminal: 70…120 mm² |
| Connector type |
1 RJ45 (on the remote graphic terminal) for Modbus serial |
| Physical interface |
2-wire RS 485 for Modbus serial |
| Transmission frame |
RTU for Modbus serial |
| Transmission rate |
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial |
| Type of polarization |
No impedance for Modbus serial |
| Number of addresses |
1…247 for Modbus serial |
| Method of access |
Slave |
| Supply |
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection |
| Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
| Width |
290 mm |
| Depth |
323 mm |
| Net weight |
53 kg |
| Analogue input number |
3 |
| Environment |
| Noise level |
78 dB conforming to 86/188/EEC |
| Power dissipation in W |
969 W(forced convection) at 380 V, switching frequency 2.5 kHz |
| 131 W(natural convection) at 380 V, switching frequency 2.5 kHz |
| Volume of cooling air |
295 m3/h |
| Operating position |
Vertical +/- 10 degree |
| Pollution degree |
2 conforming to IEC 61800-5-1 |
| Vibration resistance |
1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6 |
| 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6 |
| Shock resistance |
15 gn for 11 ms conforming to IEC 60068-2-27 |
| Relative humidity |
5…95 % without condensation conforming to IEC 60068-2-3 |
| Ambient air temperature for operation |
-15…45 °C (without derating) |
| 45…60 °C (with derating factor) |
| Ambient air temperature for storage |
-40…70 °C |
| Operating altitude |
<= 1000 m without derating |
| 1000…4800 m with current derating 1 % per 100 m |
