6DR5213-0GN00-0AA0 SIPART PS2 Smart
6DR5213-0GN00-0AA0｜SIEMENS SIPART PS2 English Specification（Original Siemens datasheet standard）
1. Model Definition & Basic Description
Part No.: 6DR5213-0GN00-0AA0
Smart electropneumatic valve positioner, SIPART PS2 series, for linear & rotary pneumatic single-acting actuators
| Code Segment | Definition |
|---|---|
| 6DR5213 | PS2 base model, aluminum housing, single-acting air output |
| 0G | Ex protection: Ex e / nEx Increased Safety & Non-incendive, no intrinsic safety Ex-i |
| N | Input: 4–20mA DC + HART 7 protocol, 2/3/4-wire signal connection |
| 00 | No limit switch module, no extra auxiliary option board |
| 0AA0 | Without local pressure gauge manifold block, standard factory configuration, no feedback output |
2. Electrical Parameter
- Control input signal: 4～20mA DC, HART communication compatible
- Supply loop voltage: Min 11.6VDC @4mA; Max 30VDC
- Wire mode: 2-wire /3-wire /4-wire configurable
- Electrical connection port: 1/2″ NPT internal thread
3. Pneumatic Parameter
- Air supply pressure: 1.4～7 bar (20～102 psi), clean dry instrument air
- Output type: Single-acting (fail open, exhaust air when power loss)
- Pneumatic connection: 1/4″ NPT female thread
- Max air consumption: ≤0.12 Nm³/h (steady state)
4. Mechanical & Environmental
- Housing material: Die-cast aluminum, IP65 protection grade
- Ambient working temp: -40℃ ～ +70℃ (-40℉～+158℉)
- Storage temperature: -50℃～+85℃
- Humidity: 5%～95% RH non-condensing
- Mounting: Standard IEC60534, VDI/VDE3845 universal actuator mounting
5. Accuracy & Performance
- Reference control accuracy: ≤±0.5% FS full stroke
- Hysteresis: ≤0.3% FS
- Stroke range auto-calibration: 3～130mm linear / 0～120° rotary auto adapt
6. Explosion Certificate
Ex e IIC T6 Gb / nA IIC T6, Non-incendive & Increased Safety certification, no Ex ia intrinsic safety
7. Excluded Factory Option
❌ No 4–20mA position feedback output
❌ No mechanical limit switch
❌ No local pressure gauge block
❌ No DIO/AOM expansion module
